Summary
- Loder Weight:1000kg
- Dimension(L*W*H):3000*1500*2200mm
- Max Lifting Height:100m
- Hoisting Speed:0-28m/min
- Rated Loading Capacity(kg):1000kg
- Model Number:SC100/100
- Brand Name:XZJJ
- Place of Origin:Xuzhou Jiangsu
- Certification:CE/ISO
Specifications
- Weight:12000.000kg
- Condition:New
- Moving Type:Other
- fully intelligent control:without a cauffeur
- frequency converting controrl:0-28m/min
Packaging & Shipping
- Delivery Lead Time:7 days for ready goods
- Minimum Order:1 Piece
- Supply Ability:10,000 Set/ Sets per Month
- Total Quantity In Stock:Over 5000
- Delivery Port:Any Port In China
SC100/100（M）type freight construction hoist ,base on the technology of both freight and person dual-purpose SC series construction elevator .combining the characteristics of low rise buildings,absorb the current domestic and foreign advanced technology design and development of a new generation of freight elevator construction freight lifts,reasonable structure,safe,easy disassembly and maintenance ,attractive appearance ,long service life.
This products use single-motor rack and pinion ,the transmission mechanism placed inside the cage ,the anti-fall safety device ,overload protection ,limit switches,etc.set in the drive plate ,cage installation of cameras,equipped with a monitor display screen special operation Taiwan set up in the cage ,remote operation via cable .Its main components rail brackets and rack attached to the wall with the SC series construction hoist common people and goods.
The product is suitable for the building construction which lower than the height of 40 meters to vertical transport of freight.
|
Technical data |
Unit |
Value |
|
SC100/100 |
||
|
Rated load |
kg |
2*1000 |
|
Maximum lifting height |
m |
250 |
|
Lifting speed |
M/min |
0-28 |
|
Jid attachment rated load |
kg |
250 |
|
Rated output |
kw |
2*13 |
|
Rated current |
A |
27*2 |
|
Inverter power |
kw |
/ |
|
Security anti-dropping model |
/ |
SAJ3.0-1.2 |
|
Voltage of power supply |
V/Hz |
380/50 |
|
Power capacity |
KVA |
30 |
|
Mast section |
mm |
650*650*1508 |
|
The hoist space |
mm |
3000*1300*2200 |
Ground Enclosure
Consists of a base to support the mast and railing.A single cage enclosure can be transformed into a twin cage enclosure by adding just a few parts.
The gate is interlocked mechanically and electrically.It can not be opened unless the cage is at the landing.The cage will not start unless the gate is closed.
Hoist Machinery
Consists of electrical motor ,electric-magnetic brake,coupling,reducing device and pinions etc.The cage climbs by means of pinion in engagement with the rack.
Tie-in
There are several types of tie-in.Select one of them according to need.Tie-in are available in variable in variable sizes.
Distance between the tie-ins is about 6~9m along the mast.
Mast Section
Each section is 1508mm long and provided with one rack for single cage hoist or two racks for twin cage hoist and welded counterweight guide rails if necessary.
The sections are bolted together with screws and nuts to form mast.The mast is tied to the building with tie-in and is the guide rail of the cage.
Cage
Consists of steel structure,firm wire mesh wall,entrance and exit gates.Guide rollers guide the cage to travel along the mast.
Safety hook on the cage main frame prevents the cage climbing off the top.
The cage roof with safety railing servers as working platform during erection.One can easily get up on the roof for erection and maintenance because of a trap door in the roof and a ladder in the cage.
Construction hoist is a kind of lifting.
In construction site,the construction elevator was operated frequently and the working conditions were poor.
Construction elevator becomes a daily prevailing application in responding to the climbing number of high story building as of today
The construction hoist’s vibration analysis has been caused extensive concern as the important vertical conveying machinery.
