Marketplace for Mechanical & Electrical Industry

XR400E Rotary Drilling Rig

1、The luffer is designed to double-boom style to provide extraordinary stability and transport convenience whose hinge joint has been majorized.
2、It adopts the H-style dedicated hydraulic retractable crawler chassis and large diameter slewing bearing to provide extraordinary stability and transport convenience.
3、Imported Cummins electric control turbo-supercharged with three gears engine is used, it has strong power. According to specific working conditions, the users can select a corresponding gear of the engine, getting the drilling rig working as three engine.
4、The main hydraulic system adopts the negative flow control, and adopts the main power control and limit power control together which can increase the system efficiency and make the most of the engine power. It adopt three-in-one colling system which is tightly packed and has a high-efficiency in cooling.
5、It adopt the single-rope for main winch to figure out the wear of the steel rope, and extend the life-span.
6、The rotary drive can switch from Nromal Mode, Rock Mode and Energy-Saving Mode, the user can select a corresponding mode of the rotary drive according to the specific working conditions, which can greatly improve the working efficiency and low the fuel consumption.
7、Optional configuration according to customers' requirement, E.g: Crowd winch, Outrigger cylinder, Sleeve-driven and so on.
8、It is equipped with a centralized lubrication system as standard configuration to provide more convenient maintenance and make the machine a good reliability .

Description	Unit		Parameter value
Max. drilling diameter	mm		2800
Max. drilling depth	m		103
Allowable luffing scope (from center of drill rod to slewing center)	mm		4700～5200
Drilling rig dimension in working condition (L × W × H)	mm		10995×4900×26640
Drilling rig dimension in transport condition (L × W × H)	mm		20755×3500×3910
Weight of overall unit (standard configuration, excluding drilling tool)	t		113
Engine	Model		CUMMINS  QSX15-C500
	Rated power/speed	kW	373/（2100r/min）
Max. working pressure of hydraulic system	Mpa		35
Rotary drive	Max. torque	kN •m	400
	Rotational speed	r/min	7～25
Crowd  cylinder	Max. Pushing force	kN	300
	Max. Pulling force	kN	400
	Max.stroke	mm	6000
Crowd  winch	Max. Pushing force	kN	400
	Max. Pulling force	kN	400
	Max.stroke	mm	18000
Main winch	Max.pulling force	kN	360
	Max. single-rope speed	m/min	60
	Diameter of the steel wire rope	mm	36
Drilling mast	Left/right inclination of mast	°	4/4
	Front/back inclination of mast	°	5/15
Rotary table slewing angle	°		360
Crawler	Width of crawler plate	mm	800
	External width of crawler (min.-max.)	mm	3500～4900
	Center distance between two longitudinal wheels of crawler	mm	5600
	Average ground pressure	kPa	120