XCMG Official 135HP Motor Grader GR135 small motor grade for sale
Specifications
- Weight:11000.000kg
- Condition:New
- Moving Type:Other
- Dimension(L*W*H):8015*2380*3050mm
- Place of Origin:Jiangsu, China
- Brand Name: XCMG
- Certification:ISO/CE
- Rated power/speed:97kw(2200r/min)
- Engine model:6BT5.9-C130-2
Packaging & Shipping
- Delivery Lead Time:7 days for ready goods
- Minimum Order:1 Piece
- Supply Ability:10,000 Set/ Sets per Month
- Total Quantity In Stock:Over 5000
- Delivery Port:Any Port In China
XCMG Official 135HP
Motor Grader GR135 small motor grade.
The GR135 motor grader is mainly used for
ground leveling, ditching, slope scraping, bulldozing, scarification, snow
removal for large areas such as highway, airports, farm- lands etc. It is the
necessary construction machinery for national defense construction, mine
construction, urban and rural road construction and water conservancy
construction, farmland improvement and so on.
Advantages and Highlights
1. GR135 adopt Dongfeng Cummins 6BT5.9-C130-
II turbocharged diesel engine, Large output torque and power reserve
coefficient and low oil consumption.
2. Torque converter has big torque
coefficient, wide high efficiency area. It has good combination working
characteristics with engine. The transmission box has six forward gears, three
backward gears, with neutral start protection function, gear shift controlled
by electro-hydraulic, flexible operation, shift without impact, reasonable
speed ratio distribution, meet the requirements of various working conditions.
3. The rear axle adopts balanced suspension
to ensure the uniform load of four wheels, which is conducive to the full use
of its adhesion ability. The main drive of the rear axle is equipped with “NO -
SPIN" self-locking differential.
4. The front axle is steering axle. The axle
can swing from side to side. In addition to the front steering, it also uses
the articulated frame, which can further reduce the turning radius.
5. The hood is structural part, well shaped
with turn over function, the two sides double door is reversible, enhances the
maintainability.
Description |
Unit |
Parameter value |
|
Engine model |
6BT5.9-C130-Ⅱ |
||
Rated power/speed |
kw(r/min) |
97(2200) |
|
Overall dimension (standard) |
8015X2380X3050 |
||
Total weight (standard) |
kg |
11000 |
|
Tire specification |
13.00-24 |
||
Ground clearance (front axle) |
mm |
515 |
|
Tread |
mm |
2020 |
|
Space of front and rear axles |
mm |
5780 |
|
Forward velocity |
km/h |
5/8/13/20/30/42 |
|
Reverse speed |
km/h |
5/13/30 |
|
Tractive effort f=0.75 |
kN |
61.3 |
|
Maximum gradeability |
% |
20 |
|
Tire inflation pressure |
kPa |
300 |
|
Working system pressure |
MPa |
16 |
|
Transmission pressure |
MPa |
1.3—1.8 |
|
Maximum steering angle of front wheel |
±49° |
||
Maximum slant angle of front wheel |
±17° |
||
Maximum oscillating angle of front axle |
±15° |
||
Maximum oscillating angle of equilibrium box |
±16° |
||
Maximum steering angle of frame |
±27° |
||
Minimum turning radius |
m |
6.6 |
|
Scrape knife |
Maximum lift height |
mm |
410 |
Maximum cutting depth |
mm |
515 |
|
Maximum tilt angle |
90° |
||
Cutting angle |
54°—90° |
||
Angle of revolution |
360° |
||
Length & chord height |
mm |
3048x610 |
|
Coolant |
L |
50 |
|
Fuel tank |
L |
260 |
|
Engine |
L |
18 |
|
Transmission |
L |
26 |
|
Hydraulic oil |
L |
96 |
|
Drive axle |
L |
28 |
|
Balancing box |
L |
46 |